Some items should always be examined.

Structure

The home’s “skeleton” should be able to stand up to weather, gravity, and the earth that surrounds it. Structural components include items such as the foundation and the framing.

Exterior

The inspector should look at sidewalks, driveways, steps, windows, doors, siding, trim, and surface drainage. They should also examine any attached porches, decks, and balconies.

Roofing

A good inspector will provide very important information about your roof, including its age, roof draining systems, buckled shingles, and loose gutters and downspouts. They should also inform you of the condition of any skylights and chimneys as well as the potential for pooling water.

Plumbing

They should thoroughly examine the water supply and drainage systems, water heating equipment, and fuel storage systems. Drainage pumps and sump pumps also fall under this category. Poor water pressure, banging pipes, rust spots, or corrosion can indicate larger problems.

Electrical

You should be informed of the condition of service entrance wires, service panels, breakers and fuses, and disconnects. Also take note of the number of outlets in each room.

Heating and air conditioning

The home’s vents, flues, and chimneys should be inspected. The inspector should be able to tell you the water heater’s age, its energy rating, and whether the size is adequate for the house. They should also describe and inspect all the central air and through-wall cooling equipment.

Interiors

Your inspector should take a close look at walls, ceilings and floors; steps, stairways, and railings; countertops and cabinets; and garage systems. These areas can reveal leaks, insect damage, rot, construction defects, and more.

Ventilation/insulation

Inspectors should check for adequate insulation and ventilation in the attic and in unfinished areas such as crawl spaces. Insulation should be appropriate for the climate. Without proper ventilation, excess moisture can lead to mold and water damage.

Fireplaces

They’re charming, but fireplaces can be dangerous if they’re not properly installed. Inspectors should examine the vent and flue, and describe solid fuel-burning appliances.

Source: National Association of REALTORS®

Radon

A colorless, odorless gas that can seep into your home from the ground, radon is often referred to as the second most common cause of lung cancer behind smoking.
What to look for: Basements or any area with protrusions into the ground offer entry points for radon. The Environmental Protection Agency publishes a map of high-prevalence areas. A radon test can determine if high levels are present.

Asbestos

A fibrous material once popular as fire-resistant insulation, asbestos was banned in 1985. However, it’s often found in the building materials, floor tiles, roof coverings, and siding of older. If disturbed or damaged, it can enter the air and cause severe illness.
What to look for: Homes built prior to 1985 are at risk of having asbestos in their construction materials. Home owners should be careful when remodeling because disturbing insulation and other materials may cause the asbestos to become airborne.

Lead

This toxic metal used in home products for decades can contribute to several health problems, especially among children. Exposure can occur from deteriorating lead-based paint, pipes, or lead-contaminated dust or soil.
What to look for: Homes built prior to 1978 may have lead present. Look for peeling paint and check old pipes. To get a HUD-insured loan, buyers must show a certificate that their older home is lead-safe.

Other hazardous products

Stockpiles of hazardous household items — such as paint solvents, pesticides, fertilizers, or motor oils — can create a dangerous situation if not properly stored. They can easily spark fires and can cause illness or even death if ingested, even in small amounts.
What to look for: Check all the corners, crawl spaces, garages, or garden sheds in the home. If these products are found, make sure you ask for their removal and get a disposal certificate prior to closing.

Groundwater contamination

When hazardous chemicals are disposed of improperly, they can seep through the soil and enter water supplies. A leaking underground oil tank or septic system can contribute to this.
What to look for: Homes near light industrial areas or facilities may be at risk, as are areas once used for industry that are now residential.

Source: National Association of REALTORS®

Closing time is hectic, but you should always make time for a final walk-through to make sure that your home is in the same condition you expected it would be.  Here’s a detailed list of
what to check for on your final walk-through.

• Basement, attic, and every room, closet, and crawl space have been checked.
• Requested repairs have been made.
• Copies of paid bills and warranties are in hand.
• No major, unexpected changes have been made to the property since last viewed.
• All items included in the sale price—draperies, lighting fixtures, etc.—are still on site.
• Screens and storm windows are in place or stored onsite.
• All appliances are operating (dishwasher, washer/dryer, oven, etc.).
• Intercom, doorbell, and alarm are operational.
• Hot water heater is working.
• Heating and air conditioning systems are working.
• No plants or shrubs have been removed from the yard.
• Garage door opener and other remotes are available.
• Instruction books and warranties on appliances and fixtures are available.
• All debris and personal items of the sellers have been removed.

Source: National Association of REALTORS®

Some items should always be examined.

Structure

The home’s “skeleton” should be able to stand up to weather, gravity, and the earth that surrounds it. Structural components include items such as the foundation and the framing.

Exterior

The inspector should look at sidewalks, driveways, steps, windows, doors, siding, trim, and surface drainage. They should also examine any attached porches, decks, and balconies.

Roofing

A good inspector will provide very important information about your roof, including its age, roof draining systems, buckled shingles, and loose gutters and downspouts. They should also inform you of the condition of any skylights and chimneys as well as the potential for pooling water.

Plumbing

They should thoroughly examine the water supply and drainage systems, water heating equipment, and fuel storage systems. Drainage pumps and sump pumps also fall under this category. Poor water pressure, banging pipes, rust spots, or corrosion can indicate larger problems.

Electrical

You should be informed of the condition of service entrance wires, service panels, breakers and fuses, and disconnects. Also take note of the number of outlets in each room.

Heating and air conditioning

The home’s vents, flues, and chimneys should be inspected. The inspector should be able to tell you the water heater’s age, its energy rating, and whether the size is adequate for the house. They should also describe and inspect all the central air and through-wall cooling equipment.

Interiors

Your inspector should take a close look at walls, ceilings and floors; steps, stairways, and railings; countertops and cabinets; and garage systems. These areas can reveal leaks, insect damage, rot, construction defects, and more.

Ventilation/insulation

Inspectors should check for adequate insulation and ventilation in the attic and in unfinished areas such as crawl spaces. Insulation should be appropriate for the climate. Without proper ventilation, excess moisture can lead to mold and water damage.

Fireplaces

They’re charming, but fireplaces can be dangerous if they’re not properly installed. Inspectors should examine the vent and flue, and describe solid fuel-burning appliances.

Source: National Association of REALTORS®